No.1 Rust Beater

Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and prevents new rust forming. This rust proofing product kills rust, primes and undercoats all in one.

  • Corrosion resistant.
  • Compatible with most topcoats.
  • Can be applied direct to rust.
  • Anti-corrosive primer for ferrous metals.
Available colors
  • Black
Colours can look slightly different in real life, due to your monitor
  • Drying timeTouch dry in 2 hours
  • Usage Exterior/Interior
  • Application type Primer

Applications

  • Treatments & Cleaners
No.1 Rust Beater can be used for:
  • BBQ
  • Fence
  • Garage door
  • Garden furniture
  • Radiator
  • Staircase
  • Stove

Features

Coverage 12
Container 205ml, 500ml, 1L and 2.5L and Aerosol
Repaintable after Recoatable after 6 hours

Preparation

  1. Remove loose rust, scale and paint by wire brushing or rubbing down with coarse abrasive paper.
  2. Abrade clean steel with emery paper to provide a key.
  3. Degrease where necessary with white spirit, rinse with clean water and allow time to dry.

Application

  1. Ideal application temperature is 8 to 25degC.
  2. Stir paint thoroughly before use.
  3. By brush: apply 2 coats, allowing 6 hours between coats. Ensure corners and edges are well covered. Apply topcoat after 6 hours.
  4. By roller: apply 2 thick coats. Thin with Hammerite Brush Cleaner & Thinners at 9 parts paint to 1 part thinners. Brush in edges first before using roller.
  5. A suitable Hammerite topcoat/paint system must be applied after a minimum of 6 hours. For best results allow 24 hours.

Cleaning and Storage

After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners or white spirit.

Metal can be divided into ferro and non-ferro. Ferro metal contains iron, while non-ferro doesn’t contain iron. To avoid or clean rust, it is important to know which surface you are dealing with. All you have to do is use a magnet to determine if your surface is ferro or non-ferro. If the magnet is pulled towards the surface, it contains iron.

Below you will find some information about different kinds of surfaces.

Ferro:

Wrought iron
The most pure form of iron is wrought iron. Therefore it is relatively resistant to rust. Nowadays wrought iron is not as often used as before. Gates are one of the few products that still contain wrought iron.

Cast iron
Because cast iron contains more carbon than wrought iron it will crack more easily. Cast iron can be found in doorsteps, ornaments on gates and manhole covers.

Steel
Because of the way it is fabricated, steel will rust more easily than other surfaces. It is mostly used in stairways, fences and bridges. To keep steel from rusting, it is sometimes combined with another metal, like tin or zinc.

Stainless steel
If chrome or nickel are added to an alloy, we call it stainless steel. This is a way to prevent the metal from rusting. Sinks, countertops and cutlery are often made of stainless steel.

Galvanised steel
Galvanised steel is steel with a layer of zinc or chrome, so it won’t rust easily. Think of car parts and bike parts.

Non-ferro:

Zinc
Zinc is a non-ferro metal which is better armed against rust than steel. For that reason, fences and stairs are often made of steel with a zinc layer. Pure zinc can be found on roofs and rain gutters. In coastal and industrial areas zinc is especially vulnerable to rust.

Aluminium
Together with iron, aluminium is the most used metal. You can find it in everything from door handles to street lights.

Write a review and help others decide. We will be very grateful.

Store locator

Please note Hammerite is not yet available on-line: you can buy Hammerite in DIY or specialty shops You can find a shop near you:

Available in the following webshops

Loading offers

Place on shopping list Keep track of the products you want to buy

Frequently asked questions

Can I re-use Hammerite Paint?

Hammerite Paint can be re-used up to 2 years after first opening the tin. If you wish to keep the paint that you have not used, then replace the original lid firmly back on the Hammerite can and store in a dry well ventilated area away from a heat source.

How do I paint on heavily rusted metal surfaces?

Remove all loose rust with a wire brush or coarse sandpaper and then clean the surface with brush cleaner & thinners. For best results apply Hammerite No.1 Rust Beater before painting with Hammerite Paint.

View all frequently asked questions

Ask an expert

Got a question that hasn't been answered?

Ask an expert