DualTECH
Improved
formula 
More about Hammerite DualTECH

Direct to Rust Metal Paint Hammered Finish

Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. The decorative hammered appearance is smooth to the touch and sheds water well.

  • Can be applied directly onto rusty metal.
  • No need for primer or undercoat.
  • Corrosion resistant.
  • Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside.
Available colors
  • HolderHammered Black
  • HolderDark Green
  • HolderHammered Gold
  • HolderCopper
  • HolderHanmmered Red
  • HolderHammered White
  • HolderHammered Silver-Grey
  • HolderHammered Navy Blue
Colours can look slightly different in real life, due to your monitor
  • Touch dry in 1-2 hoursDrying time
  • Exterior Usage
  • Lacquer Application type

Applications

  • Direct to Rust
Direct to Rust Metal Paint Hammered Finish can be used for:
  • Fence
  • Garage door
  • Garden furniture
  • Metal Door
  • Metal gate

Features

Finish
Hammered
Coverage
5
Durability
Provides up to 8 years protection
Container
Available in 250ml, 750m, 2.5L and 5L in certain colours
Repaintable after
Recoatable after 4 hours

Preparation

  1. Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.
  2. Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.
  3. Paint a test patch of Hammerite Direct to Rust Metal Paint Hammered onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Hammered directly to surface.
  4. If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint Hammered.
  5. On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Hammered.

Application

  1. Ideal application temperature 8-25degC.
  2. Lightly stir before use. Do not mix vigorously.
  3. Do not mix paint from 2 tins or mix colours.
  4. Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur.
  5. Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% Thinners to Paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply 4 thin coats. Allow 1 hour between coats. Refer to spray equipment manufacturer’s guidelines for the correct and safe use of sprayers.

Cleaning and Storage

After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.

Write a review and help others decide. We will be very grateful.

Store locator

Please note Hammerite is not yet available on-line: you can buy Hammerite in DIY or specialty shops You can find a shop near you:

Place on shopping list or Add to compare Keep track of the products you want to buy

Frequently asked questions

View all frequently asked questions

Ask an expert

Got a question that hasn't been answered?

Ask an expert