Hammerite Direct to Galvanised Metal Paint is specially formulated for application straight onto non-rusting metal, such as galvanised steel, aluminum, copper and brass, as a primer and topcoat in one. Available in six popular colours, Hammerite Direct to Galvanised Metal Paint enables you to create the look of your choice and, with its one coat application, painting these tricky metals has never been quicker or easier.
Please refer to back of pack for specific application instructions.
After use, remove as much paint as possible from brushes before cleaning with Hammerite brush Cleaner & Thinners. Do not use or store in extremes of temperature.
Write a review and help others decide. We will be very grateful.
Please note Hammerite is not yet available on-line: you can buy Hammerite in DIY or specialty shops You can find a shop near you:
Available in the following webshops
Remove all loose rust with a wire brush or coarse sandpaper and then clean the surface with brush cleaner & thinners. For best results apply Hammerite No.1 Rust Beater before painting with Hammerite Paint.
Hammerite Paint is specially formulated to be applied directly onto rusty metal with minimal surface preparation. Simply remove any loose rust with a wire brush or coarse sandpaper and clean the surface with brush cleaner & thinners and allow time to dry. Then apply Hammerite Paint directly onto the rusty metal surface. No primer, no undercoat needed.
Got a question that hasn't been answered?